InfoMine Home

Ball Mill, Rod Mill, SAG Mill, Ball Mill Motor, Drives, HydroCyclones and Pumps

D'Angelo International

Ball Mills

10.5 x 15 Allis Chalmers/Kobe Steel Ball Mill

GM211
Description: 10.5 x 15 Allis Chalmers/Kobe Steel Ball Mill w/ 800 hp – GE 800 HP Induction Motor w/ Dominion Speed Reducer – Double Helical Bull Gear, new pinion – Lube system – Gear guards – Trunnion liners – New bronze rabbit bearing inserts – Synchronous motor drive option also available.
Category: Ball Mills
Make: Allis Chalmers / Kobe
Model: 10.5 x 15
Condition: Used
Unit Price: P.O.R.
Reference: GM211
Location: USA
Email: Inquire Directly
Website: D'Angelo International

Rod Mills

10 ft 6 in x 14 ft Dominion Rod Mill

GM150
Description: 410 ft 6 in x 14 ft Dominion Rod Mill – Mill is complete and still installed on site – Equipped with SR26 Dominion Gear box – Bull Gear 324 Teeth – Pinion Gear 31 Teeth – Trunnions good – Bull gear good – Includes unused 32 tooth pinion gear to replace the worn 31 tooth pinion – Steel liners and trunnion inserts are fair – Mill shell upgraded to thicker unit in recent years – The motor has been removed and stored, reported as 900hp/4160volt wound rotor type.
Category: Rod Mills
Make: Dominion
Model: 10 ft 6 in x 14 ft
Condition: Used
Unit Price: P.O.R.
Reference: GM150
Location: USA
Email: Inquire Directly
Website: D'Angelo International

SAG Mills

16 ft x 30 ft Vecor SAG Mill

GM181
Description: 16 ft. x 30 ft. Vecor SAG Mill Available as is or fully refurbished complete with: – Refurbished mill shell, 6mm rubber lined, drilled for steel lining – Refurbished mill ends, 6mm rubber lined, drilled for steel liners – Refurbished mill bearings and housings with new seals – New lubrication systems – Refurbished girth gear – New pinion gear shaft with new bearings and new housings – Refurbished David Brown gearbox and new couplings – New mill motor – Refurbished and new bedplates for the bearings, pinion, gearbox and motor – New feed spout – New trommel screen – New support cradles
Category: SAG Mills
Make: Vecor
Model: 16 ft x 30 ft
Condition: Used
Unit Price: P.O.R.
Reference: GM181
Location: USA
Email: Inquire Directly
Website: D'Angelo International

Ball Mill Motors

1250 HP GE Synchronous Motor

EM086
Description: 1250 HP GE Synchronous Motor, 200 RPM – Type TS, Frame 6524L – 4000V, 1250kvA, Armature 180 A, Field 85 A, Exc. Volts 125, 3 Ph., 60 Hz., Cont. 70 Celsius – 38,900 lbs on stand – 10’9″ H x 9’6″ W – Starter and Eaton air clutch available separately.
Category: Electric Motors
Make: GE
Model: 1250 HP, 200 RPM
Type: Synchronous
Condition: Used
Unit Price: P.O.R.
Reference: EM086
Location: USA
Email: Inquire Directly
Website: D'Angelo International

Inching Drive

Hydraulic Grinding Mill Inching Drive

MA001
Description: Hydraulic Grinding Mill Inching Drive Mechanically connects to the non-drive end of the primary pinion. A flanged hub on the output shaft of the reduction unit slides over to bolt to the existing hub on the pinion shaft. The drive package consists of a 3 phase hydraulic power unit, all necessary control valves and the final reduction unit complete with a fail-safe brake. The package includes an infinitely variable forward and reverse manual control hydraulic valve located at the drive. When the control is placed in neutral the fail-safe spring brake locks the drive. The brake is rated for the maximum output torque with a 2:1 safety factor. Includes a mounting plate to attach to the bearing pedestal, gusseted planetary mounting plate and two wide flange extensions to support the power unit and cat walk. Units come with all hose fittings, adapters, hydraulic oil, and are painted and tested prior to shipping.
Category: Drives
Type: Inching
Condition: Used
Unit Price: P.O.R.
Reference: MA001
Location: USA
Email: Inquire Directly
Website: D'Angelo International

Cyclones

Krebs Hydrocyclones

CY010
Description: Krebs HydroCyclones – 31 units available: 28) D-20s, 3) D-15s – Some manifolds also available.
Category: Cyclones
Make: Krebs
Condition: Used
Unit Price: P.O.R.
Reference: CY010
Location: USA
Email: Inquire Directly
Website: D'Angelo International

Lube & Lift

Hydrodynamic Grinding Mill Journal Bearing Lubrication and Lift Unit

MA002
Description: Hydrodynamic grinding mill journal bearing lubrication and lift unit Base mounted reservoir complete with a full containment drip tray – Electric immersion type oil heater c/w integral thermostat – Shell & tube type heat exchanger water: oil complete with water modulation valve – Suction strainers for each lube and lift pump – Oil level sight gauge – Low oil level float switch – Mechanical local oil temperature gauge – Sealed filler neck – Filtered breather assembly – Return oil filter assembly c/w element condition “clogging” monitor with indicator switch – Drain ports for reservoir and drip tray Low pressure lubrication circuit components – Low pressure lube pump – TEFC-C faced electric motor – Shaft coupling – Pump to motor bell housing – Relief valve – Discharge check valve – Pressure gauge – 50:50 flow divider valve – Flow switch and indicator, each branch – Discharge check valves, each branch High pressure lift circuit components – Split flow pressure lift pump – TEFC-C faced electric motor – Shaft coupling – Pump to motor bell housing – Relief valve, each branch – Pressure switch, each branch – Pressure gauge, each branch – Discharge check valves, each branch All mounted, plumbed and painted to form a single unit on stand with lifting lugs. Each unit has 2 terminals for lube supply to mill, 2 terminals for lift supply to mill, 2 terminals for sump returns from mill, 2 terminals for cooling water supply and drain and 1 terminal for oil top-up/filling through the filter.
Condition: Used
Unit Price: P.O.R.
Reference: MA002
Location: USA
Email: Inquire Directly
Website: D'Angelo International

Slurry Pump

Linatex 10 x 10 Slurry Pumps

P020
Description: REMCO OreMax PreMill Vertical Shaft Impactor – Model DD-VSO10-426, Serial # 1000896-237 – Two 400hp WEG Motors, 1790 rpm, 460 volts, 60hz, Type ET, Encl TEFC, SF 1.00, 3 phase.
Category: Pumps
Make: Linatex
Model: 10 x 10
Type: Slurry
Condition: Used
Unit Price: P.O.R.
Reference: P020
Location: USA
Email: Inquire Directly
Website: D'Angelo International

Pump Drives

Nelson Variable Speed Liquid Drive

PD010
Description: Nelson Variable Speed Liquid Drive – Model PM4-370-AB1, SN 1899-1, 1750 rpm, 100 hp, mounted on common base (Linatex pump drive) – w/ Allis Chalmers 100 hp, 1770 rpm, 460V, 227/115.5A
Category: Drives
Type: Pump Drive
Condition: Used
Unit Price: P.O.R.
Reference: PD010
Location: USA
Email: Inquire Directly
Website: D'Angelo International

Category Type Make & Model Country Unit Price
3j-08-main-frame-with-stickers-a.jpg
Premium
Jaw Crushers Metso Nordberg C100 United States P.O.R
JC016_01.jpg
Premium
Jaw Crushers Single Toggle Metso Nordberg C145 United States P.O.R
3K-PHD02e.jpg
Premium
Rock Breakers John Deere / Hitachi Pedestal Mounted Rock Breaker United States P.O.R
TS010_01.jpg
Premium
Trommel Screens Triple S Dynamics Inc 9840 United States P.O.R
JC003_01.jpg
Premium
Jaw Crushers Telsmith 4448 United States P.O.R
RS002_01.jpg
Premium
Feeders Vibrating Grizzly Telsmith 4' x 16' United States P.O.R
JC018_01.jpg
Premium
Jaw Crushers Bare Allis Chalmers 6048 United States P.O.R
RS003_01.jpg
Premium
Feeders Grizzly Hewitt Robins 52" x 20' United States P.O.R
FS010_01.jpg
Premium
Single Deck Screens Vibrating WS Tyler 4' x 12' HD United States P.O.R
RS004_01.jpg
Premium
Double Deck Screens Rock Tabor 6 x 16 FT United States P.O.R
CP010_05.jpg
Premium
Processing Plants Copper / Zinc 2,200 TPD Copper/Zinc Crushing, Grinding and Processing Plant, Complete United States P.O.R
JC023_01-1.jpg
Premium
Jaw Crushers Kue-Ken 2436 95 United States P.O.R
20140607_084620.jpg
Premium
Jaw Crushers Metso C125 United States P.O.R
JC017_01.jpg
Premium
Jaw Crushers Metso Nordberg C160 United States P.O.R
JC015_01.jpg
Premium
Jaw Crushers Metso C125 United States P.O.R
JC001_01.jpg
Premium
Jaw Crushers Universal 4848 United States P.O.R
CC192_04.jpg
Premium
Cone Crushers Shorthead Symons-Nordberg 5 1/2 FT United States P.O.R
CC050_01.jpg
Premium
Cone Crushers Metso HP400 United States P.O.R
CC190_01.jpg
Premium
Cone Crushers Shorthead Lokomo S21-14 United States P.O.R
CC191_01.jpg
Premium
Cone Crushers Metso Nordberg HP300 United States P.O.R
CC194_01.jpg
Premium
Cone Crushers Shorthead Symons 3 FT United States P.O.R
CC193_01.jpg
Premium
Cone Crushers Shorthead Metso GP100 United States P.O.R
CC150_01.jpg
Premium
Cone Crushers Hydrocone Allis Svedala 5-84 United States P.O.R
CC040_01.jpg
Premium
Cone Crushers Metso HP400 United States P.O.R
RB030_01.jpg
Premium
Rock Breakers Teledyne TM-16 United States P.O.R
See More Equipment From D'Angelo International
smallDANGELO.jpg

D'Angelo International Information

Contact:
Keith D'Angelo 
Title:
Owner 
Phone:
+1 360 734 1046 
Fax:
+1 360 714 -8898 
Address:
1469 Island View Drive Bellingham, Washington, United States 
Website:
http://www.dangelointernational.com