||Complete plant from Primary Crusher to Tailings Handling, Elution and Smelting for between 150-300tph depending on configuration, including: – Primary Crushing Station – Complete crushing station including structures, platework and mechanical equipment – Conveyer to Ore Storage Bin and load out facility – Stockpile conveyor for excess crushed material – SAG Mill Feed Conveyor – 5.50 x 6.00m, 3000kW SAG Mill – Symons 4¼ ft Crushing Circuit with belt magnets, metal detectors, conveyors. Includes all structures and platework. – Gravity Gold Circuit (Knelson and Gravity Concentration Circuit) – 5.03 x 8.84m, 3700kW Ball Mill (Optional to allow plant throughput of 300tph). – Ball charging & liner handling systems – Pumps and Classification circuits (Separate circuits for SAG Mill and Ball Mill) – Leach Circuit agitators and Carbon transfer inter-stage screens – Complete 5t 02 Plant for the leach circuit – Elution Plant (5t Zadra Circuit) including Acid Wash, Elution column, Heat exchangers, etc – Carbon Regeneration Kiln and Circuit – Gold Room incl Electrowinning Cells, Heat Exchanger, Calcining furnace, Smelting furnace and Gold Safe – 16m Hi-Rate Tailings Thickener and associated flocculent plant – Tailings and water return pumps – Plant control valves, plant actuated valves and critical plant instrumentation – 4MW Power Generation Plant (with optional 4MW for 300th) with synchronization panels, diesel storage tanks, etc. – MCC Panels – MV switchgear – PLC and Scada system – New Ball Charge for both mills – All Available Drawings. See Details and Drawings.