InfoMine Home

Grinding mills and synchronous motors

D'Angelo International

Grinding mills and synchronous motors

13 ft diameter Allis Chalmers Ball or SAG Mill

13 ft diameter Allis Chalmers Ball or SAG Mill
Description: 13 ft diameter Allis Chalmers grinding mill configurable as ball or SAG mill
– Shell cut into multiple sections for transport, can be fit to desired length
– Falk Gear single helical 257 teeth with 38″ face width very little use in excellent condition
– Pinion: 21 tooth good condition with bearings
– High speed coupling
– New gear spray lubrication system, Farval type
– New hydrostatic bearing lubrication system , high and low pressure
– Liner system included, Chrome Molybdenum Steel with or without Grate
– Mill made in USA
– Stored indoors, disassembled and ready for inspection
– Motor quoted separately: Options up to 4,500 HP and in 50 and 60 Hz
– Spare used girth gear available at additional cost
– Spare unused 21 tooth pinion shaft new in box at additional cost
Category: Crushers 
Type: Ball Mills
Make: Allis Chalmers
Website: D'Angelo International

11 x 14.5 ft Dominion Ball Mill for 1,250 HP

11 x 14.5 ft Dominion Ball Mill for 1,250 HP
Description: – Mill shell with 2 doors
– Cast heads, feed and discharge
– Bull gear – 182 Teeth per 1/2, 26″ face, double helical herringbone style, mfg by Falk
– Pinion with bearings
– Mill head
– Trunnion feed liner
– Trunnion bases and caps, babbit
– Gear covers
Category: Mills
Type: Ball Mills
Website: D'Angelo International

9.5 x 12 ft Hardinge Ball or Rod Mill

9.5 x 12 ft Hardinge Ball or Rod Mill
Description: 9.5 x 12 ft Hardinge Ball/Rod Mill:
– 13 inch wide single helical pinion and ring gear
– 267 tooth bull gear
– 19 tooth pinion
– 49 x 13.5 inch trunnion bearings provided with new babbitt inserts
– Mill feed and discharge heads
– discharge trommel with 1 x 0.5 inch holes
– New trunnion bearing and gear-spray lubrication systems available at additional cost
– Spare parts (additional cost) include pinion and ring gears, and trunnion bearing inserts
Motor and liners quoted separately, rubber liners available:
Drive option:
– 800 HP GE induction motor, 885 RPM, 2200 V. Tested. – 4.01:1 Horsburgh and Scott speed reducer. Tested. – Resulting mill shell speed: 15.5 RPM
Category: Mills
Type: Ball Mills
Condition: Good
Website: D'Angelo International

5 x 7 ft Allis Chalmers Ball Mill

5 x 7 ft Allis Chalmers Ball Mill
Description: – Configured for overflow discharge wet grinding with rubber liners
– Mill feed and discharge heads, Bull Gear and pinion gear shaft and pulley inspected and NDT tested
– Provided with new shell
– Trunnion bearing pedestals and caps with integral oil sump and oil return
– New babbitt trunnion bearing inserts
– Grease block lubrication
– Pinion is pulley driven
– Used rubber liners
– New liner bolts
– New mill bolt package
– Motor quoted separately
Category: Mills
Type: Ball Mills
Condition: Used
Website: D'Angelo International

4,000 HP General Electric Synchronous Motor; 180 RPM

4,000 HP General Electric Synchronous Motor; 180 RPM
Description: 4000 HP General Electric Synchronous Motor; 180 RPM
– 180 RPM, 4000 V
– 3 PH, 60 HZ
– 595 A, 50 V/135 A Excitation,
– 1.15 SF, 0.9 PF 2
– Frame 6000
– Model 139849
– Type QTS, Updraft, Drip Proof Enclosure.
– Refurbished and tested. Report available.
– Three identical units to be refurbished. Inquire about:
EM496,
EM497,
EM498
Category: Motors
Type: Ball Mill Motors
Website: D'Angelo International

3,000 HP Westinghouse Synchronous Motor; 200 RPM

3,000 HP Westinghouse Synchronous Motor; 200 RPM
Description: 3,000 HP (2240 kW) Westinghouse Synchronous Motor
– 200 RPM
– 4160 V
– 420 Amps, 125 Excitation Amps
– Rating: Continuous
– 60 Hz
– 3 Ph
– Frame: HR-111
– Weight: Approximately 75,000 lbs
– Service Factor: 1.0
Category: Motors
Make: Synchronous Motors
Website: D'Angelo International

1,250 HP Fairbanks Morse – Colt Ind. Synchronous Motor, 240 RPM

1,250 HP Fairbanks Morse – Colt Ind. Synchronous Motor, 240 RPM
Description: 1,250 HP (925 kW) 240 RPM Fairbanks Morse – Colt Industries Synchronous Motor
– Field amps 84
– Field volts 250
– Equipment # 24-1511-00
– Frame 987-21
– Type TZO
– 3 Ph,
– 60 Hz
– 2,300/4,160 volt
– 306/177 amp
– Service Factor 1
– Spare stator
– New shaft work
Category: Ball Mill Motors
Make: Fairbanks Morse
Website: D'Angelo International

Category Type Make & Model Country Unit Price
GM869-1.png
Featured
Ball Mills 800 HP 10 x 14 ft Marcy Ball Mill with 800 HP United States P.O.R
CC882_f.jpg
Featured
Cone Crushers Standard 3 ft Symons STD Cone Crusher United States P.O.R
GC1090-1.png
Featured
Gyratory Crushers 60 x 113 in Sandvik gyratory crusher United States P.O.R
SANY2149.jpg
Featured
Gearbox 1,060 HP Lufkin Gearbox United States P.O.R
CC1066-1.png
Featured
Cone Crushers Shorthead Metso Nordberg HP200 shorthead cone crusher United States P.O.R
EM981 1.JPG
Featured
Electric Motors Induction Motors Unused 10,000 HP ABB Induction motors; 895 RPM United States P.O.R
CC596-1.png
Featured
Cone Crushers Standard Heavy Dut 7 ft Symons Standard Heavy Duty Cone Crusher – Reconditioned United States P.O.R
6X4-W-sm.png
Featured
Pumps Horizontal Slurry New Warman Style Horizontal Slurry Pumps United States P.O.R
3.5x48-GALIGHER-.png
Featured
Pumps Vertical New Galigher Style Vertical Pumps United States P.O.R
20181128_090712.jpg
Featured
Electric Motors Synchronous Motor 4,000 HP General Electric Synchronous Motor; 180 RPM United States P.O.R
EM087_01.jpeg
Featured
Electric Motors Synchronous Motor 1,250 HP Fairbanks Morse – Colt Ind. Synchronous Motor, 240 RPM United States P.O.R
CP937-8.png
Featured
Feeders Heavy Duty Apron Feeder Krupp 6 x 65 ft heavy duty apron feeder United States P.O.R
EM079_01-1.jpg
Featured
Electric Motors Synchronous Motor 4,500 HP General Electric Synchronous Motor; 200 RPM United States P.O.R
EM541542-1-1.png
Featured
Electric Motors Wound Rotor Induction Moto 800 HP General Electric Wound Rotor Induction Motor; 885 RPM United States P.O.R
CC196_01.jpg
Featured
Cone Crushers 322 Type R 22 in Allis Chalmers Hydrocone Crusher AC 322 Type R United States P.O.R
GM299_1.jpg
Featured
Ball Mills 5 x 7 ft Allis Chalmers ball mill United States P.O.R
Photo-May-03-8-55-45-AM.jpg
Featured
Jaw Crushers Metso Nordberg C160 jaw crusher United States P.O.R
2_metso_hp300_sn-30310503.jpg
Featured
Cone Crushers Metso-Nordberg HP300 Cone Crusher United States P.O.R
EM611-7.jpg
Featured
Electric Motors 3,000 HP Westinghouse Synchronous Motor; 200 RPM United States P.O.R
GM832-1.jpg
Featured
Ball Mills 7 x 10 ft Marcy ball mill United States P.O.R
PHOTO-2018-11-02-12-58-42-copy.jpeg
Featured
Cone Crushers GP300S Metso cone crusher United States P.O.R
GC797-2.png
Featured
Gyratory Crushers 42 x 65 in Allis Chalmers Gyratory Crusher United States P.O.R
FC598_1.jpg
Featured
Flotation Cells Denver and Wemco style New unused flotation cells in Denver and Wemco style United States P.O.R
MH038_installed.jpg
Featured
Cone Crushers 12 x 6.5 ft ASEA Single Drum Mine Hoist United States P.O.R
EM933-1.jpeg
Featured
Cone Crushers Crusher-duty motors from 60 to 400 HP United States P.O.R
See More Equipment From D'Angelo International
logonew.gif

D'Angelo International Information

Contact:
Keith D'Angelo 
Title:
Owner 
Phone:
+1 360 734 1046 
Fax:
+1 360 714 -8898 
Address:
1469 Island View Drive Bellingham, Washington, United States 
Website:
http://www.dangelointernational.com