InfoMine Home

Metso Tails Dewatering Pressure Filter, Allis Chalmers, & Hardinge Ball Mills

D'Angelo International

Metso Tails Dewatering Vertical Plate Airblow Pressure Filter

Metso Filter Presses
Description: Metso Tails Dewatering Vertical Plate Airblow Pressure Filter Three units w/ 6.5 bar airblow cake drying - 54 chambers of 45 ft2 - 322 ft3 filter volume - 4,520 ft2 total filter area - 87 psi clamping pressure - 116 psi airblow - 4 hydraulic cylinders: 12 in. dia. cylinder, 4.72 in. dia. rod, 16.7 ft. stroke - Polypropylene membrane plates - Natural rubber compression membranes - 108 polypropylene filter cloths, 80 in. W x 149 in. L - Hydraulic wash door operation - 30 psi (min.) cloth wash, 56 to 85 gpm - 216 spray nozzles, 4 cloth vibrators - 88 kW hydraulic pump - 35 kW high pressure pump - 127 gal. reservoir - Automated controls - Approx. 53 ft. L x 16 ft. W x 15 ft. H - Technical documents available.
Category: Filter Presses
Make: Metso
Condition: Used
Unit Price: P.O.R.
Reference: FP040
Location: USA
Email: Inquire Directly
D'Angelo International

10' X 48" Hardinge-Koppers Conical Ball Mill

Hardinge Koppers Ball Mill
Description: 10' X 48" Hardinge-Koppers Conical Ball Mill - Complete as installed -SN 731-76 -15,000 tons/year capacity - A variety of hoppers also available.
Category: Ball Mills
Make: Hardinge Koppers
Model: 10' x 4'
Condition: Used
Unit Price: P.O.R.
Reference: GM222
Location: USA
Email: Inquire Directly
D'Angelo International

Hardinge Koppers 4 1/2' x 16"

Hardinge Koppers
Description: Hardinge-Koppers 4-1/2' x 16" Cylinder Length Wet Grinding Conical Ball Mill w/ 20 hp - 1/2" Steel plate shell with access port - Cast Meehanite trunnions - 13" dia. x 10" long rabbit, grease-lubricated bearings - Girth gear 150t - 4" face, pinion 19t - 4.5" face - 24" dia. conical feeder - 24" dia. x 24" long discharge trommel - Manganese steel wave-type liners - Falk 2035 EZ All-Motor speed reducer - 20 hp Drip-Proof electric motor - 3/60/230-460 - Structural steel base for mill and drive setting mill axis approx. 6'6" above floorline.
Category: Ball Mills
Make: Hardinge Koppers
Model: 4 1/2' x 16"
Condition: Used
Unit Price: P.O.R.
Reference: GM222
Location: USA
Email: Inquire Directly
D'Angelo International

13 x 22 ft. Allis Chalmers Ball Mill w/ 4500 hp

Allis
Description: 13 x 22 ft. Allis Chalmers Ball Mill w/ 4500 hp - NEW unused shell - New spare shell also available - 4500 HP General Electric synchronous motor, 200 rpm, 4000 V, 60hz - Ramping starter - Spare girth gear - Many spare liners, some used (60%), some new - Complete with heads in good condition, gear guards, new lube system, and inching drive - Drawings and manuals - Located near port on site served by rail.
Category: Ball Mills
Make: Allis Chalmers
Model: 13 x 22 Ft.
Condition: New and Used
Unit Price: P.O.R.
Reference: GM218
Location: USA
Email: Inquire Directly
D'Angelo International

Allis Chalmers 18' x 24' w/5500 hp

Ball
Description: 18 ft. x 24 ft. Allis Chalmers Ball Mill Available as is or fully refurbished complete with: - Refurbished Mill Shell, 6mm rubber lined, drilled for steel lining - Refurbished mill ends, 6mm rubber lined, drilled for steel liners - Refurbished mill bearings and housings with new seals - New lubrication systems - Refurbished girth gear - Refurbished pinion gear shaft with new bearings and refurbished housings - New gearbox and new couplings - New mill motor - Refurbished and new bedplates for the bearings, pinion, gearbox and motor - New feed spout - New trommel screen - New support cradles.
Category: Ball Mills
Type: Overflow, Discharge, No Liners
Make: Allis Chalmers
Model: 18 x 24 ft
Quantity: 1
Condition: As Is or Fully Refurbished
Unit Price: P.O.R.
Reference: GM182
Location: USA
Email: Inquire Directly
D'Angelo International

Category Type Make & Model Country Unit Price
Portec 67,000 TPD
Premium
Processing Plants Lime Mixing Plant Portec 67,000 TPD United States P.O.R
Ingersoll Rand Portable, 1600cfm, 100ps
Premium
Compressors Portable Ingersoll Rand Portable, 1600cfm, 100ps United States P.O.R
GM206_01.jpg
Premium
Ball Mills Rubber lined Marcy 7' x 10' United States P.O.R
Canadian Ingersoll Rand 9' x 5' w/500 hp
Premium
Hoists Over Under Wind Hoist Canadian Ingersoll Rand 9' x 5' w/500 hp United States P.O.R
Linatex 10 x 10
Premium
Pumps Ball Mill Feed Linatex 10 x 10 United States P.O.R
C 0861 (2).jpg
Premium
Ball Mills Hardinge Kopper 11 x 14 ft Canada P.O.R
milling_01.jpg
Premium
Thickeners Mechanism Delkor 100ft United States P.O.R
Westinghouse 2000 HP, 800 RPM
Premium
Electric Motors 600 VDC Westinghouse 2000 HP, 800 RPM United States P.O.R
Nordberg 52
Premium
Hoists Koepe Nordberg 52" x 9.5" United States P.O.R
Allis Chalmers 9.5 ft x 8-10 ft w/400 hp
Premium
Ball Mills Overflow Discharge, Manganese Liners Allis Chalmers 9.5 ft x 8-10 ft w/400 hp United States P.O.R
Ottumwa 8' 7' w/1000 hp
Premium
Hoists Single Drum Deck 8 ft x 7 ft Ottumwa Single Drum Mine Hoist United States P.O.R
hhh.jpg
Premium
Mine Fans Ventilation High Capacity Mine Ventilation Fan 530 HP, 384,350 CFM United States P.O.R
Lakeshore 5' x 7' w/800 hp
Premium
Hoists Single Drum Deck 5' X 7' Lakeshore Single Drum Hoist w/800 hp United States P.O.R
1m.jpg
Premium
Feeders Apron Metso 6' x 23 ft. United States P.O.R
Allis Chalmers 1500 HP, 257 RPM
Premium
Electric Motors Synchronous Allis Chalmers 1500 HP, 257 RPM United States P.O.R
hp300_1.jpg
Premium
Cone Crushers Metso HP300 United States P.O.R
Canadian Ingersoll Rand 4' x 3' w/150 hp
Premium
Hoists Double Drum Cable Canadian Ingersoll Rand 4' x 3' w/150 hp United States P.O.R
1p.jpg
Premium
Jaw Crushers Pioneer 4248 United States P.O.R
Goodman 188, 12 ton, 24-30in gauge
Premium
Locomotives Trolley Goodman 188, 12 ton, 24-30in gauge Canada P.O.R
GE1.jpg
Premium
Locomotives General Electric 30 Ton United States P.O.R
Hardinge 22 ft x 7 ft w/1600 hp
Premium
SAG Mills Overflow Discharge, No Liners Hardinge 22 ft x 7 ft w/1600 hp United States P.O.R
Ottumwa 5' x 4' w/200 hp
Premium
Hoists Single Drum Deck Ottumwa 5' x 4' United States P.O.R
1d.jpg
Premium
Cone Crushers 7' Standard Symons-Nordberg HD - 300 HP United States P.O.R
mill2.jpg
Premium
Roller Mills High Pressure FLSmidth High Pressure Grinding Roll Mill United States P.O.R
GE 1500 HP, 277 RPM
Premium
Electric Motors Synchronous General Electric 1500 HP, 277 RPM United States P.O.R
See More Equipment From D'Angelo International
D'Angelo International

D'Angelo International Information

Contact:
Keith D'Angelo 
Title:
Owner 
Phone:
+1 360 734 1046 
Fax:
+1 360 714 -8898 
Address:
1469 Island View Drive Bellingham, Washington, United States 
Website:
http://www.dangelointernational.com