InfoMine Home

Processing and flotation equipment

D'Angelo International

Processing and flotation equipment

76 x 76 in (2 x 2 m) Metso VPA Filter Press Model 2040-54

76 x 76 in (2 x 2 m) Metso VPA Filter Press Model 2040-54
Description: Metso Tails Dewatering Vertical Plate Airblow Pressure Filter
Three units w/ 6.5 bar airblow cake drying
– 54 chambers with 7.8 square meter filter area, 3.9 square meter drying area
– 87 psi clamping pressure
– 116 psi airblow
– 4 hydraulic cylinders: 12 in. dia. cylinder, 4.72 in. dia. rod, 16.7 ft. stroke
– Polypropylene membrane plates
– Natural rubber compression membranes
– 108 polypropylene filter cloths, 80 in. W x 149 in. L
– Hydraulic wash door operation
– 30 psi (min.) cloth wash, 56 to 85 gpm
– 216 spray nozzles, 4 cloth vibrators
– 88 kW hydraulic pump
– 35 kW high pressure pump
– 127 gal. reservoir
– Automated controls
– Approx. 53 ft. L x 16 ft. W x 15 ft. H
Category: Filter Press
Type: Model 2040-54
Make: Metso
Website: D'Angelo International

Unused 59 x 59 in (1500 x 1500 mm) Delkor Filter Press with Hydraulic Power Pack

Unused 59 x 59 in (1500 x 1500 mm) Delkor Filter Press with Hydraulic Power Pack
Description: – Two units available
– Unused
– 59 x 59 in (1500 x 1500 mm) Delkor Filter Press with Hydraulic Power Pack
– Single ram
– Center feed
– 4 corner discharge from 5 inch outlets
– Side plate shifter
Category: Filter Press
Type: Filter Press with Hydraulic Power Pack
Make: Delkor
Website: D'Angelo International

40 x 40 in (1 x 1 m) Metso Plate Pressure Filters

40 x 40 in (1 x 1 m) Metso Plate Pressure Filters
Description:

40 x 40 in (1 x 1 m) Metso Vertical Plate Pressure Filters
Two available:
Model 1040-24
Copper filter press
8 tons/hour
24 chambers
~22 cubic feet volume
Pulp Density 1.98 T/m3
Cake Moisture 9% w/w
Cake Density(Dry) 2.4kg/L

Model 1040-20
Zinc filter press
7.5 tons/hour
20 chambers
~18 cubic foot capacity
Pulp Density 1.95T/m3
Cake Moisture 8.5% w/w
Cake Density(Dry) 2.4kg/L

Category: Filter Press
Type: Copper Filter Press
Make: Metso
Website: D'Angelo International

New Galigher Style Vertical Pumps

5 x 7 ft Allis Chalmers Ball Mill
Description:

– Totally sealed bearings
– Bottom box and top plate coated in vulcanized rubber
– Semi-open impeller coated with abrasion-resistant polyurethane
– 4140 steel shaft, Belt guards
– Supplied with one coat primer and two coats machine enamel
– Available in different lengths

Stock sizes:

– 1.5 in, Specify SKU P780 (for 5 HP) or P783 (for 10 HP)
– 2.5 in, Specify SKU P746 (x 24 in H) or P755 (x48 in H)
– 3 in, Specify SKU P823 (and required length)
– 4 in, Specify SKU P824 (and required length)
– 6 in, Specify SKU P825 (and required length)

Category: Pumps
Type: abrasive, slurry, sump pumps, vertical pumps
Condition: New
Website: D'Angelo International

New Warman Style Horizontal Slurry Pumps

New Warman Style Horizontal Slurry Pumps
Description:

– Centrifugal seal
– Cast casings and pedestal base
– Liners of pressure molded vulcanized rubber
– Impellers in rubber, polyurethane and steel available
– Fabricated over-seat motor base and belt guard
– Supplied with one coat primer and two coats machine enamel
– Manufactured in the Americas with US quality control

Stock Sizes:
– 2 x 1.5 in, Specify SKU P781
– 3 x 2 in, Specify SKU P744
– 4 x 3 in, Specify SKU P743
– 6 x 4 in, Specify SKU P810
– 8 x 6 in, Specify SKU P818
– 10 x 8 in, Specify SKU P819
– 12 x 10 in, Specify SKU P820

Category: Pumps
Type: Horizontal Pumps
Website: D'Angelo International

4,348 GPM FL SMIDTH Ultra High Rate Tailings Thickener Package

4,348 GPM FL SMIDTH Ultra High Rate Tailings Thickener Package
Description: – 49 ft W x 42 ft H (15 x 13 M)
– Design torque 720,000 ft lbs
– Capacity 328,212 GAL (1,242,418 L)
– Influent flow 4,348 GPM (988 M3/hr)
– Three 580 GPM, 30 HP Krebs millMAX 6×4-16 slurry pumps (550 GPM @ 55% Solids)
– 6 in inlet, 4 in outlet
– Complete, dismantled and ready to load out
– Drawings available
Category: Thickener
Make: SMIDTH
Website: D'Angelo International

New Unused Cyclones Made to Order

New Unused Cyclones Made to Order
Description:

– New and unused cyclones made to order
– Typical lead time: 5 weeks
– Fully assembled
– Interior covered with 1/4 inch thick vulcanized rubber
– Victaulic connections for feed and discharge
– Variety of Apex and Inlet sizes available
– Spare parts available with similar lead time

Examples of common sizes offered:
– D4B
– D6B
– D8B
– D10B
– D12B
– D15B
– D20B
– D24B
– D26B

– Inquire directly for info on other new processing equipment made to order such as float cells, pumps, and conditioner tanks

Category: Cyclones
Make: Custom Made
Website: D'Angelo International

Category Type Make & Model Country Unit Price
GM869-1.png
Featured
Ball Mills 800 HP 10 x 14 ft Marcy Ball Mill with 800 HP United States P.O.R
CC882_f.jpg
Featured
Cone Crushers Standard 3 ft Symons STD Cone Crusher United States P.O.R
GC1090-1.png
Featured
Gyratory Crushers 60 x 113 in Sandvik gyratory crusher United States P.O.R
SANY2149.jpg
Featured
Gearbox 1,060 HP Lufkin Gearbox United States P.O.R
CC1066-1.png
Featured
Cone Crushers Shorthead Metso Nordberg HP200 shorthead cone crusher United States P.O.R
EM981 1.JPG
Featured
Electric Motors Induction Motors Unused 10,000 HP ABB Induction motors; 895 RPM United States P.O.R
CC596-1.png
Featured
Cone Crushers Standard Heavy Dut 7 ft Symons Standard Heavy Duty Cone Crusher – Reconditioned United States P.O.R
6X4-W-sm.png
Featured
Pumps Horizontal Slurry New Warman Style Horizontal Slurry Pumps United States P.O.R
3.5x48-GALIGHER-.png
Featured
Pumps Vertical New Galigher Style Vertical Pumps United States P.O.R
20181128_090712.jpg
Featured
Electric Motors Synchronous Motor 4,000 HP General Electric Synchronous Motor; 180 RPM United States P.O.R
EM087_01.jpeg
Featured
Electric Motors Synchronous Motor 1,250 HP Fairbanks Morse – Colt Ind. Synchronous Motor, 240 RPM United States P.O.R
CP937-8.png
Featured
Feeders Heavy Duty Apron Feeder Krupp 6 x 65 ft heavy duty apron feeder United States P.O.R
EM079_01-1.jpg
Featured
Electric Motors Synchronous Motor 4,500 HP General Electric Synchronous Motor; 200 RPM United States P.O.R
EM541542-1-1.png
Featured
Electric Motors Wound Rotor Induction Moto 800 HP General Electric Wound Rotor Induction Motor; 885 RPM United States P.O.R
CC196_01.jpg
Featured
Cone Crushers 322 Type R 22 in Allis Chalmers Hydrocone Crusher AC 322 Type R United States P.O.R
GM299_1.jpg
Featured
Ball Mills 5 x 7 ft Allis Chalmers ball mill United States P.O.R
Photo-May-03-8-55-45-AM.jpg
Featured
Jaw Crushers Metso Nordberg C160 jaw crusher United States P.O.R
2_metso_hp300_sn-30310503.jpg
Featured
Cone Crushers Metso-Nordberg HP300 Cone Crusher United States P.O.R
EM611-7.jpg
Featured
Electric Motors 3,000 HP Westinghouse Synchronous Motor; 200 RPM United States P.O.R
GM832-1.jpg
Featured
Ball Mills 7 x 10 ft Marcy ball mill United States P.O.R
PHOTO-2018-11-02-12-58-42-copy.jpeg
Featured
Cone Crushers GP300S Metso cone crusher United States P.O.R
GC797-2.png
Featured
Gyratory Crushers 42 x 65 in Allis Chalmers Gyratory Crusher United States P.O.R
FC598_1.jpg
Featured
Flotation Cells Denver and Wemco style New unused flotation cells in Denver and Wemco style United States P.O.R
MH038_installed.jpg
Featured
Cone Crushers 12 x 6.5 ft ASEA Single Drum Mine Hoist United States P.O.R
EM933-1.jpeg
Featured
Cone Crushers Crusher-duty motors from 60 to 400 HP United States P.O.R
See More Equipment From D'Angelo International
logonew.gif

D'Angelo International Information

Contact:
Keith D'Angelo 
Title:
Owner 
Phone:
+1 360 734 1046 
Fax:
+1 360 714 -8898 
Address:
1469 Island View Drive Bellingham, Washington, United States 
Website:
http://www.dangelointernational.com