2007 Boart Longyear LF90 Underground Core Drill

- Make – Boart Longyear
- Model – LF90
- Type – Underground Core Drill
- Condition – Good
- Unit Price – $285,000
- Currency – US$
- Year – 2007
- Quantity – 1
- Unit – HB09140
- City – N/A
- State/Province – Utah
- Country – USA
- Related web site – Aamcor LLC
- Part no. – N/A

Description - HB09140. Boart Longyear LF90 Core Drill. This is a 2007 model machine, has 2002 hours, includes Bean 435 pump, skidded, FOB Location, standard 16,000 lbs. hoist, HQ nitro head, all standard Boart Longyear specs $285,000. Ready to go.

Atlas Copco A-50 Core Drill

- Make – Atlas Copco
- Model – A-50
- Type – Core Drill
- Condition – Good
- Unit Price – P.O.R
- Currency – US$
- Year – 1989
- Quantity – 1
- Unit – HB09125
- City – N/A
- State/Province – Utah
- Country – USA
- Related web site – Aamcor LLC
- Part no. – N/A

Description - HB09125. Mfg by D B Craelius, (Atlas Copco). Year of Mfg, 1989. Total hrs unknown. Engine 4 cylinder Duetz, 912, air cooled, very low hrs, recently replaced by a new unit. Feed stroke approx 12 feet. Foam injection pump. Infinetly variable feed pressure and hold back control, W/ slow and fast feed capacity. 2 speed rotary head, also has 2 different hydraulic motors for head, W/quick connects for high speed coring or high torque rotary drilling. Crawler tracks, good condition. Rotary head can shift to side by hydraulic cylinder to allow open space (centerline) to run wireline or hoist. Water/air swivel. Floating spindle for down hole hammer drilling. Drill guide has slide,(Dump) feature, also can angle to any possition, and repin to drill horizontal, entire assembly can turn left to right, like a airtrack. Main hydraulic hoist, approx 6,000lb capacity. High speed diamond drilling wire line winch. Drill is designed for mutliple tasks, to include, Rotary, DHD, Hollow stem auger, diamond core, jet grouting, reverse circulation, tie backs, soil nails, mini piles, etc. No compressor, No water pump on board, but can supply if needed, price depends on pump.

Acker 110HP Core Drill

- Make – Acker
- Model – 110HP
- Type – Core Drill
- Condition – Good
- Unit Price – P.O.R
- Currency – US$
- Year – 2007
- Quantity – 1
- Unit – HB08282
- City – N/A
- State/Province – Oaxaca
- Country – Mexico
- Related web site – Aamcor LLC
- Part no. – N/A

Description - HB08282. Hydrostatic transmission, Bean 420 pump, 110 hp Deutz 4 cylinder engine, new November 2007, Electric start, rebuilt Funk four speed transmission, Longyear HQ check with NQ and HQ jaws, Wire-line and main hoist, Slide angle mast, 11 ft. stroke, Spare chuck and wire-line parts included.

Acker 153HP Core Drill

- Make – Acker
- Model – 153HP
- Type – Core Drill
- Condition – Good
- Unit Price – P.O.R
- Currency – US$
- Year – 1984
- Quantity – 1
- Unit – HB08280
- City – N/A
- State/Province – Oaxaca
- Country – Mexico
- Related web site – Aamcor LLC
- Part no. – N/A

Description - HB08280. Acker MPV, 1984 model, truck mounted 10 wheel tandem with diesel Detroit engine, Bean 435 pump, Cummins 153 hp 6 cylinder engine with electric start, slide angle mast/ 20 ft pulls, Funk 4 speed transmission, Christensen head with Ackermatic chuck (same as Atlas Copco CS1000), spare chuck, hydraulic panel, spares included. Ready to work, currently on a project and is available immediately.

Boyles BBS37 Diamond Core Drill

- Make – Boyles
- Model – BBS37
- Type – Diamond Core Drill
- Condition – Rebuilt
- Unit Price – P.O.R
- Currency – US$
- Year – N/A
- Quantity – 1
- Unit – HB08346
- City – Salt Lake City
- State/Province – Utah
- Country – USA
- Related web site – Aamcor LLC
- Part no. – N/A

Description - HB08346. Boyles BBS37 Completely Rebuilt with the following components; (1) is a 20 GPM, and one (1) are 35 GPM Bean Pump. Everything was disassembled cleaned, inspected and replaced if needed. All parts in swivel head are new as is hydraulic bowl for jaws. New engine clutch, all new wiring and controls and indicators, draw works were rebuilt. Fuel and hydraulic tank was disassembled, inspected and cleaned, all new filters and oils in all compartments, all new hoses, and quick connects. Main frame, slide base, and mast support, were sand blasted primed and painted, all other parts were stripped by chemical stripper to bare metal, primed and painted, with industrial grade paint with hardeners. Mostly all new bolts and fasteners were used in the reassembly. FOB: Salt Lake City location.

Mobile (Foremost) B61-HD Diamond Core Drill

- Make – Foremost
- Model – B61-HD
- Type – Diamond Core Drill
- Condition – Good
- Unit Price – $125,000
- Currency – US$
- Year – N/A
- Quantity – 1
- Unit – HB08050
- City – West Valley City
- State/Province – Utah
- Country – USA
- Related web site – Aamcor LLC
- Part no. – N/A

Description - Equipment #HB08050. Mobile (Foremost) B61-HD Diamond Core Drill Mounted on Ford 6X6 Chassis with Cat 3208 Engine. Hydraulic chuck, hydrostat drive upgrade, hydraulic slide base and breakout, hydraulic rod clamp, vertical drill only. 3 winches, hydraulic Bean 35 pump, Moyno pump. All safety equipment works, lights, backup alarm etc. This is a real nice drill rig and is in very good condition. Ready to operate. HQ rig, can drill up to 2,000 feet (31,000 lbs pull back). Price $125,000.00USD.

2007 Diamec U6PHC-B15 Underground Core Drill

- Make – Diamec
- Model – U6PHC-B15
- Type – Underground Core Drill
- Condition – Good
- Unit Price – P.O.R
- Currency – US$
- Year – 2007
- Quantity – 1
- Unit – HB09142
- City – N/A
- State/Province – Utah
- Country – USA
- Related web site – Aamcor LLC
- Part no. – N/A

Description - HB09142. Diamec U6-B15 Drill module including the following:

• Feed frame with travel length of 1800 mm and 89KN pull and push rating
• Hydraulic rotation head, Boyles B-15 Type
• Boyles 12HH Hydraulic chuck with jaws
• Hydraulic / gas spring type rod holder with jaws
• Sheave wheel kit for up-hole drilling applications
• Hydraulic feed postitioner for +90 to -90 degree drilling applications
• Turntable kit
• Feed frame guard
• Channel type bracket to anchor feed frame to the rock face
• Steel base with forklift slots

Operators pilot hydraulic type control console including:

• Standard gauge package for all drilling functions
• On/Off control for flush pump
• Water flow meter kit
• Emergency stop control

Electric Hydraulic Power unit including:

• 100HP electric motor
• Double hydraulic pump system
• Water type cooler
• Hydraulic reservoir
• Pressure type filtration system
• Atlas Copco standard electric starter panel for 100HPmotor with wye delta starter
• Steel base with forklift shoes

Includes Bean Pump kit

Bins Compressors Concentration Tables Crushers - Jaw Crushers - Other Dragline Parts Drill Parts Drills - Crawler Drills - Other Drills - Underground

Explosive Mobile Equipment Fans Hoists Graders - Motor Loaders - Underground Loaders - Wheel Locomotives Mucking Machines Plants - Other Pumps

Roof Bolters Shotcretes Tanks Truck Parts Trucks - Underground Parts Trucks - Articulating Trucks - Off-Highway Trucks - Other Trucks - Underground Utility Vehicles

Other Featured Listings: