View all equipment for AAMCOR LLC »
Blasthole & Surface Drill Rigs
Gefco Speedstar 50K Deep Hole Drill Rig
| Description: |
Gefco 50K Deep Hole Drilling Rig - 1000/350 compressor; 3x4 mud pump; 25 gpm injection pump; 25k winch and 50k winch; hydraulic lift cylinder and jib boom to handle casing hammer; 1221 Tiger Tierra casing hammer; 357 Peterbilt with Cat C15 motor. Rig is in excellent condition. |
| Unit No.: |
HB13147 |
| Quantity: |
1 |
| Make: |
Gefco |
| Model: |
Speedstar 50K |
| Type: |
Deep Hole |
| Condition: |
Excellent |
| Unit Price: |
$485,000.00 USD |
| Location: |
Utah, USA |
| Email: |
Inquire Directly |
| Related Website: |
AAMCOR LLC |
Titon 600 DTH Blasthole Drill
| Description: |
R2005 Titon DTH Blast Hole Drill for sale Utah. Price on this drill has been lowered to $180,000. Contact for more information. |
| Unit No.: |
HB12375 |
| Quantity: |
1 |
| Make: |
Titon |
| Model: |
600 |
| Type: |
DTH |
| Condition: |
Used |
| Unit Price: |
$180,000.00 USD |
| Location: |
Utah, USA |
| Email: |
Inquire Directly |
| Related Website: |
AAMCOR LLC |
Maxidrill 24 Recirculation Drill Rig
| Description: |
Recirculation Drill (RC) Max Cat Rig on Track Carrier. Max Cat 24 Drill Rig; 2008 Drill rig with RC head; Less than 1,000 hrs. operating time. The asking price is $325,000.00. The rig is in excellent condition, near new. |
| Unit No.: |
HB13127 |
| Quantity: |
1 |
| Make: |
Maxidrill |
| Model: |
24 |
| Type: |
Recirculation |
| Condition: |
Like New |
| Unit Price: |
$325,000.00 USD |
| Location: |
USA |
| Email: |
Inquire Directly |
| Related Website: |
AAMCOR LLC |
2004 Pantera 1500
.jpg)
| Description: |
2004. |
| Unit No.: |
HB13105 |
| Quantity: |
1 |
| Make: |
Pantera |
| Model: |
40C 601 |
| Type: |
Blasthole |
| Condition: |
Very Good |
| Unit Price: |
P.O.R. |
| Location: |
USA |
| Email: |
Inquire Directly |
| Related Website: |
AAMCOR LLC |
Sprague & Henwood Core Drill
| Description: |
Sprauge & Henwood Core Drill; Model: 40C 601; Trailer mounted, single axle, brand new tire's, brake's, and light's. Hydraulic chuck on top of drive tube, Sprauge & Henwood model HC166R, has HQ jaw's installed, also has the manual chuck mounted on the bottom of the drive-tube, used as rod centralizer. Hydraulic raised mast, also has telescopic angle cylinder. Hydraulic wire-line winch. Cat head spinner. Ford 4 cylinder Diesel engine. Hour meter show's 909 hr's. (3) hydraulic leveling jack's attached to trailer. The drill is skid mounted, and sitting on the trailer (bolted down), but has ramps mounted to trailer under the rig, it can hoist itself onto and off the trailer with the main hoist line. |
| Unit No.: |
HB12436 |
| Quantity: |
1 |
| Make: |
Sprague & Henwood |
| Model: |
40C 601 |
| Type: |
Core |
| Condition: |
Very Good |
| Unit Price: |
$14,900.00 USD |
| Location: |
USA |
| Email: |
Inquire Directly |
| Related Website: |
AAMCOR LLC |
ECM 720 Blasthole Drill
| Description: |
We have a 2005 ECM720 Blast hole drill for sale, approximately 7500 hours on the machine, and is in great running shape and is ready to drill. Asking $185,000 but all reasonable offers will be considered. |
| Unit No.: |
HB12403 |
| Quantity: |
1 |
| Make: |
ECM |
| Model: |
720 |
| Type: |
Blasthole |
| Condition: |
Great Running Shape |
| Unit Price: |
$185,000.00 USD |
| FOB: |
Salt Lake City, Utah, USA |
| Email: |
Inquire Directly |
| Related Website: |
AAMCOR LLC |
Driltech D40K Reverse Circulation Drill Rig
| Description: |
Driltech D40K RC Drill Rig - Complete with slide angle mast setup. This is a clean one owner RC rig, it was purchased in the early 1990’s and the rig was professionally converted to a slide angle mast and recirculation package in 1991. The unit was hardly used since. Maintenance has been performed and it has been started regularly since its conversion. We originally sold this drill to a customer who decided not to get into the RC drilling business. Carrier; National Motor's Inc. (Crane Carrier); Carrier mfg date, 4/88; Vin# 1F9RBDA88J1037339; GVWR: 61,260; Front axle: 19,750; 1st and 2nd rear axle rating: 20,755; Carrier engine: Caterpillar 3208; Transmission: RT6613; Mileage showing on odometer: 2,787; Carrier engine hr's showing on meter in tachometer: 986; Tire's good; New Paint. Drill: Driltech D40K, 1989; Serial# 171490; Deck engine: Caterpillar 3406B, HP unknown, guessing 425 HP; Deck engine, and machine hr's unknown, tachometer missing from console; Compressor: Sullair, 750/250; New Paint where required. Equipped as follows: Single motor rotary head with planetary; RC system installed; Hydraulic slide base for angle drilling, extended and retracted by a single hydraulic cylinder; 4 plex Bean water injection pump, 18.5 GPM
Night light's; Hydraulic breakout wrench; Hydraulic sliding hold wrench; 3 hole Funk gear box, with (2) Dennison P6 pump's and (1)T6 double vane pump; 60,000 Lb pull back rating; Main service winch, hydraulic; Foremost type free fall wire-line winch; Tool box's left side of chassis; Large deck engine fuel tank; Cutting's sample splitter mounted on right front corner of carrier. |
| Unit No.: |
HB12273 |
| Quantity: |
1 |
| Make: |
Driltech |
| Model: |
D40K |
| Type: |
Reverse Circulation |
| Condition: |
Very Good |
| Unit Price: |
$285,000 USD or best offer |
| FOB: |
Salt Lake City, Utah, USA |
| Email: |
Inquire Directly |
| Related Website: |
AAMCOR LLC |
Tamrock Titon 600 / Titan 600 Blasthole Drill
| Description: |
Tamrock Titon 660; Engine hours today: 5532; FOB: Utah, USA. Call for more information. |
| Quantity: |
1 |
| Make: |
Tamrock |
| Model: |
Titon 600 / Titan 600 |
| Type: |
Blasthole |
| Condition: |
Used |
| Unit Price: |
$225,000.00 USD |
| FOB: |
Salt Lake City, Utah, USA |
| Email: |
Inquire Directly |
| Related Website: |
AAMCOR LLC |
Mobile B61 Core (Rebuilt) Drill
| Description: |
Mobile B61 Core (Rebuilt) Drill. Mounted on International chassis, DTA 466 Diesel engine, (electronic fuel control) New Clutch and transmission, (8 speed spicer) Completely serviced and safety inspected. See Details. |
| Unit No.: |
HB12263 |
| Quantity: |
1 |
| Make: |
Mobile |
| Model: |
B61 |
| Type: |
Core |
| Condition: |
Rebuilt |
| Unit Price: |
$75,000.00 USD |
| Location: |
Salt Lake City, Utah, USA |
| Email: |
Inquire Directly |
| Related Website: |
AAMCOR LLC |
Le Roi and Joy RC Track Crawler Drills
| Description: |
2 RC Crawler drills: 1 Le Roi with GM engine 1 Joy with Deutz engine 1000 feet of 3 1/2 inch DS RC Pipe. |
| Unit No.: |
HB12004 |
| Quantity: |
2 |
| Make: |
Le Roi and Joy |
| Model: |
RC Track |
| Type: |
Recirculation (RC) |
| Condition: |
Used |
| Unit Price: |
$55,000.00/Package Deal |
| Location: |
Salt Lake City, Utah, USA |
| Email: |
Inquire Directly |
| Related Website: |
AAMCOR LLC |
Dateline Drilling RC Drilling Rig
| Description: |
Dateline Drilling manufactured RC drilling rig Track mounted CAT undercarriage, steel tracks Rebuilt extensively in 2010 here in Salt Lake City, Utah; Capacity: 300 meters with 4" dual tube pipe; Slide angle mast; Lightweight remote operator panel; Reverse circulation conversion; Compressor and tools available at additional cost. |
| Unit No.: |
HB11251 |
| Quantity: |
1 |
| Make: |
Dateline Drilling |
| Model: |
RC Rig |
| Type: |
Recirculation (RC) |
| Condition: |
Used |
| Unit Price: |
P.O.R. |
| Location: |
Salt Lake City, Utah, USA |
| Email: |
Inquire Directly |
| Related Website: |
AAMCOR LLC |
Ingersoll Rand DM-M2 Blasthole Drill
| Description: |
For immediate sale - Ingersoll Rand DM-M2 Blast Hole Drill at a sale price of $400,000/offer FOB South American port. The drill is in perfect working condition with only 1500 hours since overhaul. USD $360,000 put into this rig when overhauled. 100% operational in excellent working condition. Hours since overhaul: 1500 hrs. |
| Unit No.: |
HB12160 |
| Quantity: |
1 |
| Make: |
Ingersoll Rand |
| Model: |
DM-M2 |
| Type: |
Rotary |
| Condition: |
Excellent |
| Unit Price: |
$400,000.00 USD |
| Location: |
FOB: South American Port |
| Shipping Information: |
See Specifications. |
| Email: |
Inquire Directly |
| Related Website: |
AAMCOR LLC |
Gardner Denver Deep Hole Drill
| Description: |
Carrier; Pierce Portland 4 Axle Carrier Drill rig: John Deere Tier III, 300 HP engine; Estimated Drill Depth Range is 6,000 feet; Using 3 1/2" drill pipe; Allison Automatic Transmission; Runs Range III Casing. Mast and Derrick: Custom built with square tubing; 63 feet overall length. Top Drive: King Oil 3P5-14; 85 ton capacity; 46 feet travel from table to crown. Blocks: 7/8" Drill line (8 lines). Auxiliary Components: 6,000 lb. Winch; New custom drive on sub structure with 13' clearance below table. Overall condition of this rig is good, and the unit is ready to drill. Photos on our web site www.aamcor.com |
| Unit No.: |
HB13146 |
| Quantity: |
1 |
| Make: |
Gardner Denver |
| Model: |
6000 Ft Drill Depth |
| Type: |
Deep Hole |
| Condition: |
Good - Ready to Drill |
| Unit Price: |
P.O.R. |
| Location: |
Utah, USA |
| Email: |
Inquire Directly |
| Related Website: |
AAMCOR LLC |
More Used Equipment from AAMCOR LLC
Contact for More Information
Harley Bradbury
Tel: +1 (801) 232-5158
Email: harleycoint@bigplanet.com
AAMCOR LLC
2128 Constitution BLvd, West Valley City, UT 84199, USA
|
|
